Lambton Machinery (Zhengzhou) ltd. uses CEMA Standard, CAD, CAM and CNC Technology, offering special conveyor designs for different industries. Lambton’s Belt conveyor is widely used in grain, food, seed, beer and other beverages, pesticides, tailings, chemical engineering, coal, port and other industreis. It’s capacity can be up to 1500t(wheat)h or 100t(malt)h.

Drum Belt Conveyor Features:

1. Advanced technology in drum design ensures smooth running and long life span.
2. Many kinds of drum combinations for different material
3. Conveyors with large capacity and length use large drum, cushion drum and regulating drum ensurig safe running
4. Can meet requirement of no breakage and low residue level, applicable to seed,grain and oil industries.
5. Optional conveyor stuctures: The complete close, semi‐close and open style.
6. Portable and fixed type are availible for both level and inclined conveyor.
7. Assembled type and easy erection.

Air Bed Belt Conveyor Features:

1. International advanced drum, air chamber design and manufacture skills ensures safe and smooth running.
2. Stiffened belt.
3. Specially suitable for outdoor work, no additonal safe gaurd device is needed.
4. Assembled type and easy erection.
5. Portable and fixed type are both available.
6. With perfect enviroment protection feature.

Bucket elevator selling features

HEAD

-Galvanized Modular Bolt Together Design

-TG&P Shafts

-Slide Lagging On Head Pulley Standard

-Standard UHMW Liner in Head Cap (Available In Urethane & AR Steel)

-Double Spherical Roller Bearings

-Vertical and Horizontal Alignment Bolts For Bearings

-UV Resistant HDPE Dust Seals, Precision Punched To Shaft Dia.

TRUNKING

-Hemlock Seam Has More Strength Than Welded Seam

-Tie Frames Welded To Trunk With Silicon Bronze

-Hot Dipped Angle Iron Flanges

-Trunking Flanges Are Numbered For Assembly To Ensure Leg Stacks Straight If Jig Is Off

BOOT

-Galvanized Modular Bolt Together Design

-TG&P Shafts

-Slotted Rod Boot Pulley Standard (Winged Pulley Optional)-Prevents Corn From Getting Trapped Between Belt And Pulley

-Pillow Block Ball Bearings

-Acme Threaded Take Up Rod

-HDPE Dustseal Behind Takeup Adjustment Plate, Precision Punched To Shaft Dia.

-Vertical Stiffening Angles In Frame Of Boot To Give More Rigidity & Strength

-Spring Loaded Takeup Does 2 Things

1. Pulley Has Give ...Takes Pressure Off Of Belt If Cup Catches Somewhere In Leg

2. Visual Aid For Belt Tension

HEAD SECTION

-Galvanized, Modular Bolt Together Design

-Double Spherical Roller Bearings

-UV Resistant HDPE Dust Seals, Precision Punched To Shaft Dia.

-TG&P Shafts

-Enclosed Belt Shield & Compact Motor Mount Design

TRUNK SECTION

-Galvanized, Modular Bolt Together Design

-All Panels (Sides, Bottom And Top) Are Individual Pieces For Easy Replacement If Needed

-UHMW Return Rollers-Standard...Return Rails Optional

-Splice Plate Joiners - Stronger Connection Than Angle Flanges

-Roller Chain Standard (81x, 81xh, Double Row 81xh)

-Paddles Assembled On Chain At Factory

-10g AR Side Liners, 1/4" A

Rr Bottom Liner, 5g Bottom Available

BOOT SECTION

-Galvanized, Modular Bolt Together Design

-TG&P Shafts

-Pillow Block Ball Bearings

-UV Resistant HDPE Dust Seals, Precision Punched To Shaft Dia.

-Acme Threaded Take Up Rods

ANGLE OF OPERATION

LEVEL DRAG CONVEYORS

-0-4 Degrees - Should Be No Issue With Capacity

->4-8 Degrees - Chain Should Be Double Flighted (Paddled)

->8 Degrees - Use Incline Conveyor

INCLINE CONVEYORS

->8 Degrees - 50 Degrees

-Galvanized Head And Boot Vs Painted

TG&P Shafts

-Bolt Together Design - No Welding

-Head Or Tail Driven Either Left Or Right Hand Drive

-Factory Assembled Drives

-Curved Steel Liner In Tail To Help Guide Paddle Into Tube And With Capacity When Cannon Is Run On An Angle

Tubing Gauge

6" - 12 Gauge

8" - 10 Gauge

10" - 10 Gauge

12" - 10 Gauge

Paddle

6" - 1/2"Uhwm

8" - 1/2" Uhmw

10" - 1/2" Uhmw

12" - 1/2" Uhmw

Chain

6"-81x

8" - 81xhh

10" - 81xhh

12" - 81xhh

-Angle Of Operation Up To 60 Degrees

-Vertical Tube Spacers Are Bolt On To Help With Adjust When Connecting Tubing

-Galvanized Bolt On Horizontal Splice Connectors

-Galvanized Corners Vs Painted Corners

-Split Sprockets In Corners Standard

-Split Transitions In Corners Standard

-Double Spherical Roller Bearings

-TG&P Shafts W/ Step At Bearings To Prevent Shaft Migration In Slant Loops.

TUBING GAUGES

6" - 12 GAUGE

8" - 10 GAUGE

10" - 10 GAUGE

12" - 10 GAUGE

PADDLES

6"-1/2" UHMW

8" - 1/2" UHMW

10" - 1/2" UHMW

12" - 1/2" UHMW

CHAIN

6" - 81X

8" - 81XH

10" - 81XHH

12" - 81XHH

GATE CONTROLS

-Rack And Pinion Controls With Solid Pressure Angle Rack Vs. Rack And Pinion Controls With Chain

Application

Screw conveyors move materials either horizontally, on an inclined or vertically. They are used to feed, distribute, collect or mix and can be equipped to either heat or cool while performing this transfer. They are widely used in grain & oil, feed, food, metallurgy, mine, plastic, chemical engineering, building and medicine industries. It is suitable to convey powdery, granulous and nubbly bulk materials etc. The screw conveyors are mainly made of carbon and stainless steels. The special specification will be ordered as requested.

Features

• It consists of reducer with motor, gear, bearings, helix, casing, lubrication system, etc;
• Custom-designed to handle almost any materials in almost any application;
• Conveying granular, flake, and chunk materials—pulp stock, powders and minerals etc;
• Corrosive and abrasive materials are also conveyed by modifying design;
• Economical method of elevating and conveying;
• Bearing a wide range of pressure and flow;
• Evenly and smoothly continuous flow, free from vibration, low noise and high speed;
• Solid structure, easy operation, installation and maintenance, as well as environmental friendly;

A 32.5° standard roof angle is provided for both structured and non-structured versions in accordance with site requirements. Peak load capacities are engineered as needed from 4 K to 30 K. Upgraded roofs are available for higher snow/wind load areas. Fall arrest anchor points are standard on all Lambton roofs.

Lambton supplies roof ladders as standard.
Optional ladder handrails and stair packages are also available.

Various platform types are available for rest, side draw and at-eave locations.

Farm-stiffened grain bins feature an innovative swedged joint that eliminates the need for stiffener splices (where applicable) and reduces erection cost.

Conventional ladder and safety cage is available for safe access. If you prefer an easier climb, Lambton can fit your bin with a curved stairway.

Lambton design technology optimizes bin construction with accurate calculations for wind stresses, roof-mounted equipment loads, and snow, including evenly distributed and unbalanced snow loads. Our designers will recommend a range of upgrade options based on loading inputs for your specific application and location.

44" or 66" (depending on application) access doors supplied with each bin. A bin step is standard for easy access to your grain bin.

All sidewall sheets feature 4" wide corrugation with G115 galvanized coating* for superior protection and long lasting service.

We use JS1000™ plated Grade 8.2 hardware for bin assembly. JS1000™ plating has been proven to remain completely rust-free in over 1,000 hours of salt spray testing, that’s 20 - 25 times the corrosion resistance of regular electro-zinc products.

When recommended for your area, wind rings are provided as part of the grain bin structure. Rings are 2 1/2" OD tube rolled to match your bin diameter.

Commercial grain bins use a robust stiffener for added strength and stability that is required for taller and larger storage bin applications.

Unloading options include Power sweep systems, conventional tube unloads, sweep augers and chain conveyors.

Commercial grain bins use a robust stiffener for added strength and stability that is required for taller and larger storage bin applications.

Centrifugal and axial fans with high and low speeds available to meet all your aeration needs. Full or partial aeration floors are available to suit any application.

Roof sheets utilize a 3" rib and flat plane corrugation with 4" spacing for increased rigidity.

•Designed in accordance with the AISC Manual of Steel Construction using the latest in finite element analysis software by RISA Technologies

•Constructed of ASTM A-529 Grade 50 mill certified structural steel angle

•ASTM A-325 galvanized bolts, nuts, and locking devices used for all structural connections

•Structural Steel is “hot dipped” galvanized in accordance with ASTM A-123 and ASTM A-153 standards

•Corothane I Mio-Aluminum coating available

•Open catwalk total deflections kept to a maximum of L/180 for comfort, and a maximum of L/240 for walkthru catwalks.

Lambton offers you HUNDREDS of standard models of towers to meet your specific and unique needs.

•Designed in accordance with the EIA/TIA & ASCE standards

•Designed using the latest in finite element analysis software by RISA Technologies

•Constructed of ASTM A-529 Grade 50 mill certified structural steel angle

•ASTM A-325 galvanized bolts, nuts, and locking devices used for all structural connections

•Steel is “hot dipped” galvanized in accordance with ASTM A-123 and ASTM A-153 standards

•Corothane I Mio-Aluminum coating available

•Bare steel with no coating

•Foundation designs available

•Can be designed for any wind speed or ice requirement

•Box tubing, pipe, or solid round legs available

•Tower mounted head service platforms

•Tower mounted distributor platforms

•Internal service platforms

•Tower Mounted climbing ladder systems

•Catwalks & Walk-Thru Truss systems

•Switchback & Wrap around stair systems

•Access bracing at customer specified locations available